CDSWin Structural

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
         
 
 
                                                                     
 
 
 
       
 
 
 
       
 
 
 
       
 
 
 
         
 
 
 
         
 
 
 
                                                                     
the LIGHT version has the same characteristics of the No Limits version, but it is limited to a structure with a maximum of 500 nodes, 300 members, 300 square meters of separators, 300 square meters of plates. It can be integrated with the No Limits version by paying the difference in the price list.      
     
                         
       
 

Description of the single CDSWin forms:

1
 Base Module: free geometry of the 3D structure, prospective, removal of hidden lines, rendering, drawing in DXF format, 6 g.d.l. resolution, non limit on the number of g.d..l. of the structure, sismic static analysis, graphic control of the results: color maps, static distortion visualization and thermics of the structure, diagrams. Print of tables in Italian and English. WinCAD.
2
 Input for planks with automatic load analysis, drawing of carpentry plans.
3
 Elevation members in concrete (Air beams and columns): input, calculation, verification and iron drawing.
4
 Foundation members (elastic beams on elastic ground): input, calculation, verification and iron drawing.
5
 Seismic dynamic analysis with a rigid level or concentrated masses.
6
 Vertical shell (support walls, hardening separators, perforated separators): input, calculations, verification and iron drawing.
7
 Foundation beds and elevation plates of generic form. Input, calculation, verification, and iron drawing.
8
 Nodal internal restraint and generic external, even elastic. Concentrated Nodal Loads (Fx, Fy, Fz, Mx, My, Mz).
9
 Interactive Management of iron beam drawings for the flexure reinforcements, shear and torsion with a covering diagram.
10
 Automatic assembly of the table for the plotter.
11
 SLU and SLE: verifications at the ultimate limit state and to the serviceability limit state for concrete and steel.
12
 Generic 3D input and combination of multiple loads; Linear copies, rotational and roto-shifting: managed by work plans.
13
 Members in steel and wood (UNI CNR),appraisal of resistance and instability; graphic archive of simple and composed sections.
14
 Verification of structural nodes in steel and automatic drawings of metallic carpentries.(Requires module 13, Module 8 is recommended)
15
 Non linear calculation: non geometric linearity and mechanic.




Other Structural softwares linked to CDSWin

For the purchase multiple structural programs, interfaced with CDSWin, the following discounts will be applied: 2 programs 15%, 3 programs 20%, 4 programs 25%.
CALCULATION AND VERIFICATION OF BUILDINGS IN MASONRY (aligned to the directives of 98 for the seism of Umbria and Marche).
CALCULATION OF THE CARRYING CAPACITY OF THE FOUNDATIONS carrying capacity, elastic subsidings, and of consolidation
CALCULATION AND DRAWINGS OF PLINTHS direct and with piles, rectangular and polygonal, graphic input.
CALCULATION AND DRAWINGS OF FLOORS AND STAIRS in latero-cement put in work, prefabricated latticework or the prefabricated slab

 

 

ACRWin Technical Accounting

For the purchase of more programs at the same time of technical accounting (excluding ACRWin Light) the following discounts will be performed: 2 programs , 15%; 3 programs 20%, 4 or 5 programs 25%.

 
 
 
 
 
   
     
   
       
 
 
 
                                 
           
-
  
   
 
           
     
           
-
  
 
           
     
 
-
 
 
 
-
                               
     
 
 
           
     
   

The LIGHT version has the same characteristics from the NO LIMITS version, but is limited to ten items in list, 150 registrations in calculation, 150 registrations in the book. It may be integrated with the No Limits version by paying a difference between the list prices.

All STS's software are interfaced with ACRWin for the automatic calculation of the materials.


Description of the single ACRWin Modules:

1
 Calculation: price list, metric calculation, work estimate, comparative picture, assessments of changes. WinCAD (CAD for the dynamic connection with the calculation). WinEDITOR.
2
 Cronoprogram: Gantt diagram, project calendar, productivity impacts, diagram of monthly productivity.
3
 Tenders: management of special tenders of contract ( over 20 tenders on RTF file).
4
 Price Analysis: (over 3500 analyses already located are included).
5
 Accounting LL.PP: works per unit and to measure, book SAL, registry, certificates, lists in economy.
6
 Legal interest and of delay: calculation of interests for delay and accounting or emission of item of expenses.

 

 

Other Softwares of Technical Accounting

MAINTENANCE PLANS art. 40 DPR 554/99, Maintenance plan, maintenance manual and user manual fo the works. SAFETY IN CONSTRUCTION SITES Law Decree 528/99, Safety and Coordination Plans, Operational Safety Plans (POS), Work schedule, Parametric CAD..
SICUREZZA NEI CANTIERI D.Lgs. 528/99 , Piani di sicurezza e Coordinamento, Piani Operativi di Sicurezza (POS), Fascicolo dell'opera, Programma dei lavori, CAD Parametrico.
MANAGEMENT OF CONSTRUCTION SITE COSTS, Schedule of Work (Gantt) and Vehicle Management.
LIGHT Version: as the previous version, but without the work schedule (Gantt). It is limited to 400 materials, 20 workers, 20 vehicles, 100 equipments and 2 construction sites.
CALCOLO TABELLE MILLESIMALI

 

 

 

WinROAD Topography and Roads

 
 
   
     
   
       
                                         
                   
 
   
 
                       
         
             
 
   
                                           
               
   
 
                       
     
The LIGHT version has the same characteristics of the No Limits version, but is limited to 250 survey points. You can integrate it with the No Limits version by paying the difference between the price list.


Description of the single WinROAD versions

WinRoad ENTRY - cadastral topography, 3D topography, acquisition of the data of the tools, calculation and area subdivision, polygonal 3D, generation of the numeric 3D ground model (DTM), restraint management, section and ground profiles, volume calculation for a comparison of 3D models, generation of the scarps and calculation of ground movements of the project models, based on the DTM located, navigator and 3 D rendering with altimetric base coloring, interface with geotechnics programs.
WinROAD Basic - WinROAD Entry and planoaltimetric street project, profiles and road sections, automatic calculation of the ground dimensions of the sections and profiles, insertion and/or manual modification of the sections, project level, road type sections, volume calculations and calculation of materials. Final drawings of road planimeter, sections, profiles, technological networks, model type networks (wells, pipes, pipelines for cables), volume calculation and calculation of fencing materials.
WinROAD Full - WinROAD Basic and management of multiple members in the same project, correlated section, shear of section in the interference areas, complete drawing of correlated sections.

 

 

 

WinGEO Geotecnics

For the purchase of multiple Geotechnical programs, the following discounts will be applied: 2 programs 15%; 3 programs 20%; 4 programs 25%.
CCALCULATION AND DRAWING OF WALLS OF SUPPORT: in seismic areas, of different topologies: A GRAVITA in concrete, on piles, on large steps, etc. (includes the reduced version of CDDWin to verify the global stability).
LIGHT Version: as the previous version but without: micro piles, tie-beams, multiple load conditions, air brackets, broken face and multiple layer of the pushing embankment.
CALCULATION AND VERIFICATION OF BULKHEADS - flexible partitions in consistent and/or inconsistent grounds. Graphic input (correction with CDCWin and CDDWin)
BERLENISE Module, graphic input, calculation, final projects, and metric calculation.
VAPPRAISAL OF STABILITY OF THE DECLIVITY - graphic input via mouse or imported from CAD. Theories used: Bishop, Jambu, Bell and Morgestern-Price.
MODULE OF REINFORCED LAND.
APPRAISAL OF SECTIONS IN CONCRETE of any form to the slu and to the allowable stresses. Interfaced with CDBWin for the intervention on the verification of the sections of the bulkheads.

 

 

 

Assistance and Updates
The purchase of the update gives the user the right to the new software version only of the modules that he/she already owns
  Assistance ** annual for all the STS software library (includes annual update)
Structural
  Assistance ** annual CDS + CDMa + CDG+CDP+CDGs (includes annual update)
   
Light
No Limits
  CDS update (requires the SLU and SLE module) from ONE release
  CDS Update (requires module SLU and SLE) from TWO releases
  CDS Update (requires module SLE and SLE) from THREE or MORE releases
  Assistance ** annual CDMa + CDF + CDP + CDGs (includes annual update).
  Update CDMa, CDF, CDP, CDGs from ONE release for ONLY ONE program
  Update CDMa, CDF, CDP, CDGs from MORE releases for ONLY ONE program
  Update CDMa, CDF, CDP, CDGs from ONE release for TWO OR MORE programs
  Update CDMa, CDF, CDP, CDGs from MORE releases for TWO or MORE programs
Technical Accounting
  Assistance ** annual ACR + MaintPRO + WinSAFE (includes annual update)
   
Light
No Limits
  Update ACR from ONE release
  Update ACR from MORE releases
  Assistance ** annual MaintPRO and/or WinSAFE (includes annual update)
  Update MaintPRO and/or WinSAFE
  Assistance ** annual WinCANT
  Update WinCANT (from MORE releases)
  Assistance ** annual CTMWin
Geotecnic Engineering
  Assistance ** annual CDW + CDC + CDD + CDB (includes annual update)
  Update CDW, CDC, CDD, CDB from ONE release for ONLY ONE program
  Update CDW, CDC, CDD, CDB from MORE releases for ONLY ONE program
  Update CDW, CDC, CDD, CDB from ONE release for TWO OR MORE programs
  Update CDW, CDC, CDD, CDB from MORE releases for TWO or MORE programs
Topography and Roads
 

Assistance ** annual WinROAD (includes annual update)

   
Light
No Limits
  Update WinROAD from ONE release
  Update WinROAD from MORE releases

** Foe the owners of the last distributed release.

Additional Keys

  Additional Keys - Additional key (without printing the charts) - (excluding WinSAFE, CTMWin and MaintPRO).
  COMPLETE KEY (complete with print out of charts) cost of the program minus 40% ( with the exception of ACRWin Light).
....-
  Network keys for 5 workstations other than the cost of the program (in substitution to the key given in dotation).

The prices indicated in EURO, VAT at 20% excluded, includes hardware protection key, operational manual, CD-Rom and telephone assistance for 3 months from the date of purchase.

Compatible operational systems: Windows 95, 98, 2000, ME, NT, XP. To move from the DOS versions to the Windows, contact the commercial section (phone +39 095 7252559 or +39 095 7254855).